Unintentional drowning causes ten deaths a day, according to the CDC. Two of those accidents occur every day to children which makes purchasing an alarm for your swimming pool so important.
We are all aware of the sobering statistics, but we should also take water safety seriously, especially when it comes to children.
It is impossible to be too careful with backyard pools. Pools can’t be watched at all times. It’s frightening how fast children can get away and get close to the pool without anyone noticing.
It’s a comfort for pool owners to have an alarm for their pool. Any unexpected disruption is alerted by these security devices. It may be legal to install an alarm in some areas.
Here is a swimming pool alarm that you should take into consideration.
Table of Contents
What is a Pool Alarm?
A pool alarm detects and alerts pool owners when there is unanticipated contact with the water.
Typically, the sensor within the alarm is triggered by the waves created by a person – or sometimes an animal – that falls in.
In addition to pool alarms, other safety measures, such as a pool gate, are also essential to your pool’s safety.
Adding a gate alarm, floating siren, or water motion detector to your pool will ensure that nobody will get wet unless you want them to.
It is a good idea to install a pool alarm for a variety of reasons. Knowing that your pool is protected gives you peace of mind.
Our review of the PA-30 Pool Alarm from Pool Patrol will help you simplify your search. It is meant to be a second layer of security to protect your loved ones.
Pool Patrol PA-30 Pool Alarm
This Pool Patrol alarm system comes with a receiver and transmitter. An alarm will be sounded as soon as there is an intrusion at the pool, and the information will be transmitted to a receiver nearby.
The setup is simple, so you’ll be up and running in a matter of minutes. During installation, there will be no damage done to the pool.
ASTM Compliant
The pool alarm from pool patrol is ASTM F-2208-08(2019) compliant.
This compliancy was developed by ASTM International for pool alarms for the residential swimming pools and spas.
How does it work?
The receiver has two modes of operation: one based on serial numbers (SN mode), the other on identifiers.
In SN mode, the receiver will accept transmissions from any Pool Patrol transmitter (this is the default setting). Serial numbers are the same for all transmitters.
With ID mode activated, the receiver accepts the serial number and ID number for the transmission. Every transmitter has its own ID number.
Placing a Receiver
In order to achieve optimal reception, the receiver should be placed adjacent to a wood door or window within 200 feet of the transmitter.
Place the receiver away from steel walls, cabinet doors, electrical appliances, such as computers, and metal surfaces since these can affect signal reception.
Pool alarms won’t transmit their signals through the ground.
How and Where to Place the Pool Alarm?
Pool alarms can be used for all types of pools. There are both aboveground and inground pools, as well as inflatables and soft sides.
If you have one alarm for your pool follow this below guide on where to place it.
If you have multiple alarms for your pool follow the below guide on where to place it.
With the receiver and the pool alarm, you can monitor your pool from anywhere in your house. Activating the floating alarm activates the receiver.
Pool Patrol PA-30 Pool Alarm Review
Pros
- Floats on the pool surface
- Easy to install
- User-friendly
Cons
- Highly sensitive
- Last for only a year
Customers Verdict:
It saved my toddler’s life, and I will be forever grateful. When my daughter is in the pool or any of us is around, the pool is usually covered. After sneaking out of the back sliding door, my daughter jumped in with her feet. The alarm that went off immediately prevented her from going any further. In the pool as well as indoors, there is a loud alarm. This is a must-have.
This thing lasted a year before it died. Alarms began ringing without reason due to oversensitivity. Furthermore, removing the battery would prevent it from turning off at all.
This was a great machine when it worked, but now it’s a waste of money since it cannot be repaired.
Note:
- A POOL PATROL alarm is not intended for saving lives or as a safety device for lifeguards, fences, covers, or locks.
- Pool Patrol alarm doesn’t alert if there’s any gradual entry into the pool.
Also, read
- Best Shock Alert for Pools Review
- WaterWarden Inground Swimming Pool Safety Net Review
- How to Get Algae Out of the Pool Without a Vacuum?
- Hayward W3DE6020 ProGrid Diatomaceous Earth Pool Filter
Faq & Troubleshooting Guide
When a small dog or cat of about 8 pounds falls in, does it work?
This will work.
Is it tethered to anything or does it float on its own
A short tether is included with it, but it can be removed if you do not need it. Be sure the alarm is functioning properly if it’s free-floating. Additionally, it has an adjustable alarm sensitivity.
Can the rain set off the alarm?
Yes.
What is its connection to the house alarm?
A second transmitter is charged in your home through WiFi. Regardless, the sound is extremely loud. There is no chance of missing the alarm.
The pool alarm won’t work.
There is no battery or the battery is low. Replace the 9V alkaline battery with a new one.
Occasionally, the pool alarm makes a chirping sound.
There may be a low voltage in the battery. Install a new 9-volt alkaline battery.
The pool alarm used to work, but now it doesn’t.
There can be oxidation buildup on the sensing post. Using steel wool, gently clean.
False alarms are sounded by the pool alarm.
You may want to make sure the alarm isn’t near the filter, pump, or jets. Ensure that the inlet for the filter is pointing downward.
There is no light coming from the receiver’s LED.
Ensure the power jack of the wall transformer is connected to the receiver, and that the wall transformer is connected to a 110V outlet. Make sure the ON/OFF switch is turned on.
A pool alarm is triggered, but the receiver does not work.
There might be a distance between the alarm and the receiver. Move. The receiver is likely to be located in an insulated building with metal siding. Consider moving near a window.
Alarm sounds without apparent cause.
It is possible that a neighbor also has a security system. Train the transmitter to the receiver by placing the receiver in ID mode.
Even though there are many types of pool alarms available, you and your family have to decide which one is right for you. Consider whether you need additional protection before you invest in an alarm. Each pool and home requires a different type of alarm.
The decision you make will be one you will not regret. There is no price for peace of mind.
